No products in the cart.
USD
- USD
0
SPECIAL DEALS (free shipping with code MULTIMAGSHIPPING)
-30%
$38.00
18 rounder for your WE M14/M14 EBR GBBR. New, never used.
These do not come with the original boxes, but they will be individually wrapped in bubble wrap for protection.
I offer these cheaper than Evike, so at least there's that.
-18%
$29.69
$36.00
18 rounder for your TM V18 New, never used. Blister packaging can be removed to help save on shipping- some of the blister packaging was cracked upon shipment, but the mags themselves are fine. Inlet valves will be installed prior to shipping. I offer these cheaper than Evike, so at least there's...
-36%
$42.00
$65.00
20 rounder shawty mag for your TM MWS M4 or Type 89. New, never used. These do not come with the original boxes, but they will be individually wrapped in bubble wrap for protection. Inlet valves will be installed prior to shipping. I offer these cheaper than Evike, so at least there's...
HPA ADAPTERSAssembled units, plug and play!
-15%
$90.00
$105.00
Now updated to Version 3! Improvements with Version 3 of our Modular Adapter System include the following: Higher average FPS compared to previous versions Increased gas/HPA efficiency compared to previous versions "AEG" M4/AR15 magazine release Each adapter is engraved with a unique serial number Uses OEM WE Tech feedlips Can...
Our Saturn System AEG magazine conversion for your GBBR (drum, AEG magazines, rifle and other accessories not included). After adding your AEG magazines, add your remote line and go! Compatible with WE-Tech M4-style platforms. Takes Angel Custom or Battle Axe drums (not included). Note: Lead time is estimated 1-2 months depending...
$117.00
$150.00
Now updated to Version 3! Our magazine conversion for your KWA Kriss Vector GBB (AEG magazines, replica, and other accessories not included). Improvements with Version 3 of our Modular Adapter System include the following: Higher average FPS compared to previous versions Increased gas/HPA efficiency compared to previous versions Each adapter is engraved...
Can't find a KWA Vector Magazine that is both a) shorter than the 50 rounders and b) not price gouged by the "i know what i got!!1 $1000 OBO" crowd? Say no more fam. 30ish round capacity (usually 33) Uses CNC milled and 3D-printed parts. Easily replaceable and cheap baseplates/floorplates if you like...
-22%
$117.00
$150.00
Now updated to Version 3! Our magazine conversion for your KWA Kriss Vector GBB (AEG magazines, replica, and other accessories not included). Improvements with Version 3 of our Modular Adapter System include the following: Higher average FPS compared to previous versions Increased gas/HPA efficiency compared to previous versions Each adapter is engraved...
-63%
$15.00
$40.00
Connect your main adapter to this V3 Lower to use Angel Custom AEG drum magazines! Includes Loading Nozzle.
Angel Custom drum magazine and other Modular Adapter System parts not included.
US PAT 10619968
$15.00
$40.00
Connect your main adapter to this V3 Lower to use M4/STANAG AEG magazines! Ordering this will also include the needed mounting hardware (screws, pre-installed nuts). "Off-hand" version uses a paddle release that's seen on the Cassini Hi-Capa adapters. "Metal release" version uses an AEG release. Includes Loading Nozzle. M4 AEG magazine and other...
Required loading nozzle for use with the Black variable V3 Modular Adapter System.
This nozzle is used if you intend on the Angel Custom or Battle Axe Lowers.
Required loading nozzle for use with the Black variable V3 Modular Adapter System.
This nozzle is used for most M4 AEG magazines, EXCEPT for PTS EPM1.
-38%
$10.00
$16.00
Airline extension for V3 adapters like the Vector, this will relieve stress on the magazine base.
1/8 NPT quick disconnect.
Replacement baseplates for the Vector Baby Extended Magazines, available in all three styles.
Includes spring guide and mounting screw for every plate purchased.
Magazine not included and used for illustrative purposes (when installed) only.
STOCK ADAPTERSFor 1931/Picatinny and Buffer Tubes
$20.00
$30.00
I played too much Modern Warfare 2019, so I bring to you this. This "No Stock" adapter replaces the original stock with a metal QD sling cup that has full rotation. The body of the mount itself is low-profile with minimal protrusions to not imbalance the look of the Vector. +20%...
Wanted to put a 1913/Picatinny interface stock or brace on your KWA Vector? Look no more. Includes: CNC milled 1913 stock adapter 3D Printed Vector hinge CNC milled from TIE Fighter-grade aluminum and comes in a bare/raw finish and a few toolmarks may be present. The bare finish allows you to go for an...
VERSION 2 NOW SHIPPING: Version 2 now comes with internal threads and can be either CNC machined or 3D printed. Wanted to put a milspec M4 buffer tube on your KWA or KSC MP9? Look no more. Includes: Buffer Tube adapter Pin to affix stock onto MP9 (for 3D printed version) CNC...
Wanted to put a 1913/Picatinny interface stock or brace on your KWA or KSC MP9? Look no more. Includes: 1913 stock adapter CNC version is milled from TIE Fighter-grade aluminum and comes in a bare/raw finish and a few toolmarks may be present. The bare finish allows you to go for an anodized or...
Wanted to put a 1913/Picatinny interface stock or brace on your KWA MP7? Look no more. Includes: 1913 stock adapter CNC milled from TIE Fighter-grade aluminum and comes in a bare/raw finish and a few toolmarks may be present. The bare finish allows you to go for an anodized or cerakoted/gunkoted treatment. Compatibility...
UPGRADE PARTSSHOP ALL
-39%
$5.50
$9.00
UPDATE: New stronger Version 2! Now 90% more black. Replacement feedlip for your KWA Vector GBB SMG magazines. Since the original spares are discontinued, we decided to try to produce our own feed lip to the best of our ability in a decent time frame. We're not going to exaggerate say...
Replacement for your broken or cracked baseplates. Features a super-wide clearance hole where your fill valve would be, handy if you used an HPA tap. Comes in three versions, Extended, Regular, and KWA OEM: Extended Version: baseplate is flush with your extended magazine shroud/cover Regular Version: baseplate is flush with the magazine if your...
VERSION 2 NOW SHIPPING: Version 2 now comes with internal threads and can be either CNC machined or 3D printed. Wanted to put a milspec M4 buffer tube on your KWA or KSC MP9? Look no more. Includes: Buffer Tube adapter Pin to affix stock onto MP9 (for 3D printed version) CNC...
$15.00
Aftermarket buffer suitable for VFC's SCAR-H/MK17 GBB. VFC's buffer basically has speed holes- this one doesn't and is more rigid since it's really just a solid block. Rubber cylinders above and below the spring guide help dampen recoil and the shock exerted by the bolt flying back. The pads are also...
Replacement Bolt Carrier/BBU for your KWA Kriss Vector, just in case you need one. Easier installation with no need to have tiny tweezers for wee little tension pins unlike the original.
Less than 10g overall
Is a black color
Hardware to mount your loading nozzle is included
-70%
$3.00
$10.00
Spare outer shroud/casing for your KWA Vector 50rd magazines.
This is an original KWA part, brand new, sticker still attached. Some stickers are faded from the factory, however.
No trademarks or Kriss/.45 acp markings as these are the newer version.
Please see options for pricing for buying multiples!
Includes 1 (one) charging valve/inlet valve/fill valve for use in your KWA Vector or other KWA GBBs.
The KWA Vector 50rd Magazine Seal Kit option includes:
2x Part 310
1x Fill Valve
1x Part 353 (Magazine Base)
1x Part 358 (Gasket)
1x Part 355 (Brass Tube)
Wanted to put a 1913/Picatinny interface stock or brace on your KWA MP7? Look no more. Includes: 1913 stock adapter CNC milled from TIE Fighter-grade aluminum and comes in a bare/raw finish and a few toolmarks may be present. The bare finish allows you to go for an anodized or cerakoted/gunkoted treatment. Compatibility...