VFC SCAR H/MK17 Buffer

V3 disclaimer: some filing might be needed on the rear of the lower receiver's edges if your bolt is getting stuck. you will also need to trim/remove your buffer wall if isn't gone already otherwise the bolt will eat it. see pictures:

(lower receiver picture courtesy of Lukem)

V3 Sharper Recoil omits the spring for slightly sharper recoil impulse compared to V3 Spring.

V3 Spring now released: it [usually] doesn't require tools to be installed/uninstalled! This installs the same way as part 09-25 on the guide rod and replaces both 09-25 and 09-26. Reduces rate of fire to more passably realistic levels and has more travel ("full travel")

Aftermarket buffer suitable for VFC's SCAR-H/MK17 GBB.

VFC's buffer basically has speed holes- this one doesn't and is more rigid since it's really just a more solid block.

Rubber cylinders above and below the spring guide help dampen recoil and the shock exerted by the bolt flying back.

The pads are also removable if you really want to feel it, Mr. Krabs (it's very much suggested that you keep them in there though).

Features include:

• CHONK BE THICC
  
• Rubber cylinders included and pre-installed.
  

V1: held in place like the original buffer
V2: held in place by the upper using a screw via the screw hole that is behind the rear iron sight on the upper.
V3: IMPORTANT, THIS REPLACES BOTH PART 09-25 AND 09-26. DO NOT USE THIS WITH THE ORIGINAL BUFFER OR MY V1/V2. Install how you would Part 09-25. Slight filing on lower receiver may be needed.

(this is dedicated to Nicole who told me that the VFC buffer has speedholes [and then i learned that the buffer i got in my second-hand gun was not normal thanks reddit user very cool] )